How to build failure reports from Unimus device jobs. Review large scale job reports for better understanding of why jobs fail on your devices.

A short guide describing how to deploy Unimus Core in a Docker container on MikroTik's RouterOS.

A guide how to backup devices which don't expose their configs over CLI using Unimus' API and a bit of scripting.

In this guide we look at how to pair your Unimus deploy with Active Directory and how to use LDAP for auth in Unimus.

A how-to guide on monitoring Unimus device job results in NetXMS and creating NetXMS alarms if a device doesn't have a valid backup. We will also explore how to run Unimus jobs directly from NetXMS.

In this guide, we show you how Microsoft's Network Policy Server, or NPS for short, can be configured to act as a RADIUS server for AAA in Unimus. By using NPS, you can use your domain (AD) credentials to login to Unimus.

MikroTik SwitchOS, unlike its RouterOS sibling, doesn't have a CLI interface over SSH nor Telnet. In this article, we look at how to pull backups from SwOS through its HTTP(S) interface into Unimus.

In this article we setup a highly-available Unimus Core pair in a 2 node cluster using Corosync and Pacemaker.

Part 2 of our Cisco IOS update automation series where we look at how to automate large scale IOS upgrades with Unimus.

Part 1 of our Cisco IOS update automation series where we look at how to easily automate large scale IOS upgrades with Unimus.

MTU on MikroTik is something you don't often deal with (unless you run MPLS, in which case you do). In this article I wanted to share a few useful RouterOS scripts when dealing with MTU.

With the Backup Exporter you can keep copies of your backups stored offsite in case of a catastrophic failure that removes your ability to use your Unimus server.

A guide to create and upload backups of FRRouting (FRR) into Unimus. Useful scripts for use with the Unimus API for FRR backup and config management...

In Unimus 2.0.0 we migrated our Slack integration to a full-featured Slack App. This was necessary since we added full Config Change notifications over Slack in 2.0.0. This blog article contains steps to full configure a Slack Bot for usage with Unimus.

Using Unimus to check if your RouterOS devices are compromised across your whole network. Also a look at how to audit and fix security holes for old and new MikroTik exploits alike.

Keeping the firmware/software of your networking equipment up to date is important. Learn how to do a network wide mass upgrade of MikroTik RouterOS with the network automation and config push features present in Unimus.